Table of Contents
Advertisement
Technical Specifications
Technical Specifications
Specifications
Technical
Technical
Specifications
EQm
EQm
EQm
Maximum Fluid Working Pressure
Operating Temperature
Recommended Compressor Size
Blast Hose Size
Abrasive Capacity*
Dry Weight
Wet Weight*
Pressure Pot Volume
Water Inlet Connection
* Abrasive capacity and wet weight was found using 80 grit garnet. Using coarser media or less dense
media will decrease weight.
Air Supply Hose Minimum ID
185–600 CFM compressor and less than 100 ft.
hose length
Over 600 CFM compressor or greater than 100
ft. hose length
Sound Data**
Sound Pressure Level
Sound Power Level
Instantaneous Sound Pressure Level
** All readings were taken at the maximum system blast pressure 150 psi (10.3 bar, 1.03 MPa) from the
operator position. The abrasive used was garnet and the substrate was steel. Tested in accordance with
ISO 9614-2.
66
U.S.
U.S.
U.S.
175 psi
35˚ - 110˚ F
185–600 CFM
1.25 in. ID
440 lb.
370 lb.
900 lb.
3.5 cubic feet
3/4 in. garden hose
connection
1.5 in. ID
2 in. ID
133 dB(A)
139 dB(A)
131 dB(C)
Metric
Metric
Metric
12.1 bar, 1.21 MPa
1.6˚ - 43.3˚ C
5.3-17 m^3/min
31.75 mm ID
200 kg
168 kg
408 kg
184 liters
19 mm garden hose
connection
38 mm ID
51 mm ID
133 dB(A)
139 dB(A)
131 dB(C)
3A3489A
Advertisement
Table of Contents
