Programming The Pxie-4135; Troubleshooting; What Should I Do If The Pxie-4135 Doesn't Appear In Max - National Instruments PXIe-4135 Getting Started Manual

Programming the PXIe-4135

You can generate signals interactively using the NI-DCPower Soft Front Panel (SFP) or you
can use the NI-DCPower instrument driver to program your device in the supported ADE of
your choice.
Application
Programming
Interface (API)
NI-DCPower SFP
NI-DCPower
Instrument Driver

Troubleshooting

If an issue persists after you complete a troubleshooting procedure, contact NI technical
support or visit ni.com/support.
What Should I Do if the PXIe-4135 Doesn't Appear in
MAX?
1. In the MAX configuration tree, expand Devices and Interfaces.
2. Expand the Chassis tree to see the list of installed hardware, and press <F5> to refresh
the list.
3. If the module is still not listed, power off the system, ensure that all hardware is correctly
installed, and restart the system.
Table 3. PXIe-4135 Programming Options
Location
Available from the start menu
at Start»All Programs»
National Instruments»
NI-DCPower»NI-DCPower
Soft Front Panel.
LabVIEW—Available on the
LabVIEW Functions palette at
Measurement I/O»
NI-DCPower.
C or LabWindows/CVI—
Available at Program Files»
IVI Foundation»IVI»
Drivers»NI-DCPower.
Microsoft Visual C/C++—NI-
DCPower does not ship with
installed C/C++ examples.
The NI-DCPower SFP acquires,
controls, and presents data. The NI-
DCPower SFP operates on the PC, to
provide additional display
capabilities.
NI-DCPower configures and operates
the device hardware and performs
basic acquisition and measurement
options using LabVIEW VIs or
LabWindows/CVI functions.
Refer to the Creating an Application
with Microsoft Visual C and C++
topic of the
and SMUs Help
required include and library files to
your project.
PXIe-4135 Getting Started Guide | © National Instruments | 15
Description
NI DC Power Supplies
to manually add all