Preparing The Environment; Installing The Software - National Instruments PXIe-4135 Getting Started Manual

Preparing the Environment

Ensure that the environment you are using the PXIe-4135 in meets the following
specifications.
Operating Environment
Ambient temperature range
Relative humidity range
Storage ambient temperature range
Maximum altitude
Pollution Degree
Indoor use only.
Note Refer to the device specifications on
specifications.

Installing the Software

You must be an Administrator to install NI software on your computer.
1. Install an ADE, such as LabVIEW or LabWindows
2. Insert the driver software media into your computer. The installer should open
automatically.
If the installation window does not appear, navigate to the drive, double-click it, and
double-click
autorun.exe
3. Follow the instructions in the installation prompts.
Note
installation. Accept the prompts to complete the installation.
4. When the installer completes, select Restart in the dialog box that prompts you to restart,
shut down, or restart later.
.
Windows users may see access and security messages during
0 °C to 55 °C (Tested in accordance with
IEC 60068-2-1 and IEC 60068-2-2. Meets
MIL-PRF-28800F Class 3 low temperature
limit and MIL-PRF-28800F Class 2 high
temperature limit.)
10% to 90%, noncondensing (Tested in
accordance with IEC 60068-2-56.)
-40 °C to 70 °C (Tested in accordance
with IEC 60068-2-1 and IEC 60068-2-2.)
2,000 m (800 mbar) (at 25 °C ambient
temperature)
2
ni.com/manuals
™ ™
/CVI
PXIe-4135 Getting Started Guide | © National Instruments | 5
for complete
.