Accessories; Configuring The Pxie-4135 In Max - National Instruments PXIe-4135 Getting Started Manual

A Access Status LED
B Voltage Status LED
C Chassis ground
D Output LO
E Sense LO
F Triaxial connector pin Output HI
G Triaxial connector inner shield, Guard
H Triaxial connector pin, Sense HI
I Triaxial connector outer shield, Chassis ground
J Safety Interlock Input
K Safety Interlock Pass Thru - Input
L Safety Interlock Ground
M Safety Interlock Pass Thru - Ground

Accessories

Additional Connector Kit with Interlock Connector for
PXIe-4135 SMU
Safety Interlock Connector

Configuring the PXIe-4135 in MAX

Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX
informs other programs about which NI hardware products are in the system and how they are
configured. MAX is automatically installed with NI-DCPower.
1. Launch MAX.
2. In the configuration tree, expand Devices and Interfaces to see the list of installed NI
hardware.
12 | ni.com | PXIe-4135 Getting Started Guide
Table 1. Front Panel Connectors
Table 2. PXIe-4135 Accessories
Accessory
Description
Manufacturer
NI
Phoenix Contact 1790292
Part Number
784484-01