Four channel precision source-measure unit (smu) (20 pages)
Summary of Contents for National Instruments SCXI-1332
Page 1
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...
National Instruments SCXI-1332 terminal block to configure the SCXI-1127/1128 switch module as a 4 × 8, 2-wire matrix. Screw terminals on the SCXI-1332 allow you to access the 4 × 8 matrix. The SCXI-1332 also contains terminals for connecting rows and columns between modules using expansion cables.
Page 3
Notify NI if the terminal block appears damaged in any way. Do not install a damaged terminal block into your system. Store the SCXI-1332 in the antistatic envelope when not in use. 2. Verify the Components Make sure that you have the following items: ❑...
Page 5
1 Top Cover Screw 2 Top Cover Figure 1. SCXI-1332 Top Cover Diagram NI SCXI-1332 Installation Instructions ni.com Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
Page 6
4. Expand the Number of Columns The SCXI-1332 offers convenient methods for expanding the number of columns of a matrix using two or more SCXI-1332 terminal blocks. If you are not expanding the number of columns of the matrix, skip to the 6.
Page 7
Figure 3 shows how to use a matrix expansion cable with SCXI-1332 terminal blocks to expand the number of columns of a 4 × 8 matrix. The matrix expansion cable connects rows to expand the number of columns. To expand the number of columns of a matrix, complete the following steps: Connect one end of the matrix expansion cable to a row connector in one of the terminal blocks.
Page 8
The SCXI-1332 offers convenient methods for expanding the number of rows of a matrix using two or more SCXI-1332 terminal blocks. Figure 4 shows how to use two matrix expansion cables with SCXI-1332 terminal blocks to expand the number of rows of a 4 × 8 matrix. The matrix expansion cable connects columns to expand the number of rows.
To connect the SCXI-1332 to the SCXI-1127/1128 front connector, complete the following steps: Plug the SCXI-1332 onto the front connector on the SCXI-1127/1128. Tighten the top and bottom thumbscrews on the terminal block rear panel to hold it securely in place.
Maximum current (per channel) .......... 2 ADC, 2 AAC Environment The NI SCXI-1332 is intended for indoor use only. Operating temperature......0 °C to 50 °C Storage temperature ....... –20 °C to 70 °C Relative humidity ........10% to 90% RH, noncondensing Pollution Degree ........
To obtain the DoC for this product, visit , search by model number or product line, and click the ni.com/certification appropriate link in the Certification column. NI SCXI-1332 Installation Instructions ni.com Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
Page 12
National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the Terms of Use section on ni.com/legal for more information about National Instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National Instruments products, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your CD, or ni.com/patents.
Page 13
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment SERVICE CENTER REPAIRS WE BUY USED EQUIPMENT • FAST SHIPPING AND DELIVERY Experienced engineers and technicians on staff Sell your excess, underutilized, and idle used equipment at our full-service, in-house repair center We also offer credit for buy-backs and trade-ins •...