Disconnecting The Cables - Xerox Phaser 850 Repacking Manual

Disconnecting the cables

Repacking the printer and its accessories
4
Phaser 840 and 850 Color Printers
Once the printer completes its shut down process, the front panel goes blank.
Once this happens, disconnect the power cord and all other cables from the
printer.
W
A R N I N G
The printer weighs about 36 kg (79 lb.). Do not attempt to lift it without the
assistance of another person.
1. Repack the media tray.
media tray to prepare it for shipping. Reinsert the media tray into the
printer.
2. Repack the printer.
tray, as shown. Lower the printer onto the cushion inserts. Place the
plastic bag provided over the printer. Place the cushion inserts on each
side of the printer.
3. Repack the printer's accessories.
and all printer documentation in the area provided in the accessories
box, as shown. Do not ship a partially used maintenance drawer .
Position the cardboard tray insert into the
Position the lower cushion insert in the shipping
Place the power cord, cleaning kit,
1239-38b