B. Braun Vista basic Quick Reference page 2

Important Keys
7 8 9 0
Number
4 5 6 C
Keys
START
1 2 3
STOP
Alarm Light
Infusing Light
Setting the Pump
1. Press (On/Off).
2. Press button on top of door to open.
3. Insert tubing into pump.
• Push open tube pincher A
• Place tubing in tube pincher A
• Insert tubing along channel B
• Push tubing into Air In Line Detector C
4. Close Door.
950853-Rev 06/02
5. Is this a new therapy?
Yes, No, OK, etc.
• Yes
• No
On/Off
(Power)
programmed infusion.
Alarm Silence
6. Prime set?
Start/Stop
• Yes
• No
Continuous Mode
1. Enter the rate using the number keys.
2. Press VTBD
3. Enter the bag volume using the number keys.
4. Press OK
A
B
5. Press START
C
: clears current infusion data.
: returns pump to last
: follow prompts to prime tubing.
: begin programming infusion.
.
.
.
Piggyback Mode
1. Press OPTS until PIGGYBACK is displayed
2. Press ON .
3. Press END .
4. Press PIGY .
5. Enter Rate/VTBD or VTBD/Time as in
Continuous Mode.
6. Press START .
Changing the Rate
1. While infusing,
enter the new rate
using the number
keys.
2. Press OK .
NOTE:
If the OK key is not pressed within 10 seconds
of the change, the infusion will continue at the
original rate.
Changing the VTBD
1. Stop infusion.
2. Press VTBD .
3. Press .
4. Enter the new
volume to be
delivered.
5. Press OK .
6. Press .