Installation - Graco TexSpray 248091 Operation And Parts

Grounding
English
To reduce risk of electrical shock, proper electric
grounding is essential. See your sprayer instruction
manual and consult your local electrical codes for
detailed grounding instructions.

Installation

1 Relieve Pressure, page 5.
1
1
6
Setup
ti4003a
2 Connect air and material
hoses to gun. Tighten securely.
2
2
Français
3A
2A
1A
ti4002a
3 If using fine finish adapter,
install disc (2a) on front of
adapter (3a) with retaining ring
(1a). Install a standard 8 mm
nozzle (4a) on front of gun with
the assembly. If desired finish
is not achieved, try a different
size standard nozzle.
See Nozzle Selection Chart,
page 7.
For Standard operation:
install nozzle (4a) on front of
gun and secure using retaining
ring (1a). See Nozzle Selection
Chart, page 7.
3
3
Spanish
4A
4 Refer to system operation
manual to start and prime
sprayer.
4
4
Setup