WARNING
MISE EN GARDE
ADVERTENCIA ADVERTÊNCIA
Page 2
B
ti4339a
Material Flow
Adjustment
•
For a lighter spray pattern,
decrease material pressure at
sprayer.
•
For a heavier spray pat-
tern,increase material pressure
at sprayer.
•
•
A
ti4000a
Air Flow Adjustment
• Trigger gun.
• To decrease air flow, close air
valve (A) (clockwise)
• To increase air flow, open air
valve (A) (counter-clockwise).
NOTE: Keep a small amount of air
flowing through air line and gun tip
to prevent material from backing up
needle
•
•
Preventing Material
Surge at Gun Trigger
Pressure will build up in system
when you stop triggering gun. To
prevent material surge at
beginning of spray pattern,
• when you first pull trigger, point
gun away from surface you are
spraying.
• hold gun away from surface
and gradually work your way
closer to it.
• trigger gun as little as possible
•
•
Spray Techniques
D
ti4006a
For Continuous
Spraying
• Engage trigger lock (D) to hold
trigger open and reduce
fatigue.
•
•
11