Language Setting Procedure - Skyjack SJ3220 Service Manual

Skycoded Module

5.4-9 Language Setting Procedure

The Skycoded display panel shows the operator
the status of the machine in real time. If the operator
raises the platform, the Skycoded display will show
"151:LIFTING!" These messages and associated codes
can be found in the Help Messages and Fault Codes
table. These messages can be shown in different
languages according to the user preference.
Change the language setting
1. Press and hold the ESC button for 3 to 4 seconds.
2. Press to get to "HELP" and press ENTER
or
to select.
3. Press to get to "LANGUAGE" and press
or
ENTER to select.
4. Press to change the language and press
or
ENTER to select.
5. Press ESC a few times to go back to the main
menu.
SJ3220, SJ3226, SJ4720, SJ4726, SJ4732
Section 5 – Procedures
223198ABA
171