Chapter 4 Procedures Before Operation - Mitsubishi Electric MELSEC iQ-R Series User Manual

4
PROCEDURES BEFORE OPERATION
This chapter explains the procedures before operation.
1.
Wire a module.
Connect a cable to a BACnet module.
Page 35 WIRING
2.
Power the system ON.
3.
Set the BACnet module.
BACnet modules can be set by either engineering tool or web browser.
Page 24 Configuring Settings Using Engineering Tool
Page 26 Configuring Settings Using a Web Browser
4.
Create a program.
Page 37 OPERATING EXAMPLE
5.
Reset the system.
6.
Execute the program.
7.
Start the operation of the BACnet module.
4 PROCEDURES BEFORE OPERATION
4
23