Connection / Disconnection; Maintenance - GYS GYSPACK 650 Translation Of The Original Instructions

Translation of the original instructions
• Avoid flames and sparks. Do not smoke.
• Protect the electrical contacts of the battery against short-circuiting.
Acid projection hazard!
• Wear safety goggles and protective gloves
• If your eyes or skin come into contact with battery acid, rinse the
affected part of the body with plenty of water and seek immediate
medical assistance.

Connection / disconnection:

• Disconnect the power supply before connecting/disconnecting the
device to/from the battery
• The terminal of the battery that is not connected to the car frame
must be connected first. The other connection must be made on the
car frame, far from the battery and the fuel line. The battery charger
must be connected to the power supply network.
• After the charging process, disconnect the battery charger from
the power supply network and remove the connector from the car
frame and then the connector from the battery, in this order.
Connection:
• This device must be connected to an earthed power supply
• This machine is fuse-protected.
• Connection to the mains must be made according to the national
installation regulations.
• Prise de raccordement du chargeur.

Maintenance:

• If the power supply cable is damaged, it must be replaced by the
manufacturer, its service agent or an equally qualified person.
• Service should be performed by a qualified person
8
GYSPACK 650-810 EN