Back Functions
Connecting Unit
to a Controlling
Device
NOTE
To connect to the
UX301
•
Mounting stud holes
RJ45
HOST
CONNECTOR
UX401 Rear View
Figure 2
The rear of the contactless device shows the following connectors:
•
RJ-45 host communication connector
•
SMA (RF) antenna connector
Use the following cables to connect the UX401 to the UX301 controlling device:
•
8-pin RJ45 to RJ45 (VPN CBL159-313-02-A)
•
SMA cable, 0.8 m (VPN CBL159-302-03-A).
For EMVCo L1 compliance, please use the provided cables.
Both connections are necessary for using the UX401 contactless unit.
1
Connect the RJ-45 plug to the rear of the UX401.
UX301
RJ-45
Connecting the UX401 to a Controlling Device
Figure 3
2
Connect the 8-pin connector to the UX401 and the other to the UX301 port
labeled "Ux401".
Connecting Unit to a Controlling Device
SMA
CONNECTOR
RJ-45
SMA
UX401 I
S
ETUP
SMA
11
G
NSTALLATION
UIDE