Editing The Rhythm Settings - Boss RC-500 Owner's Manual

Editing a Memory

Editing the Rhythm Settings

For details on the parameters, refer to "Parameter Guide" (PDF).
* Rhythm parameters can also be edited from the edit screens for a memory.
1. Select the memory for which you want to
edit the rhythm settings.
2. Long press the RHYTHM [ON/OFF] button.
The rhythm settings screen appears.
J
LEVEL
3. Turn the [MEMORY/VALUE] knob to select the
parameter that you want to edit, and press the
[MEMORY/VALUE] knob.
REVERB
J
4. Turn the [MEMORY/VALUE] knob to change the
value, and press the [MEMORY/VALUE] knob.
5. Repeat steps 3–4 to edit the parameter that
you want.
6. Long press the RHYTHM [ON/OFF] button, or
press the [EXIT] button to return to the play
screen.
7. If you want to save the edited settings,
execute the Write operation (p. 10).
14
Parameter
100
Value
50
Parameter Expalnation
LEVEL Adjusts the volume of the rhythm sound.
Specifies the depth of the reverb that is
REVERB
applied to the rhythm.
PATTERN
Selects the rhythm pattern.
VARIATION Selects the rhythm pattern variation.
Specifies the timing at which the rhythm
VAR.CHANGE
pattern's variation is changed.
Selects the drum kit used to play the
KIT
rhythm.
Specifies the time signature of the
BEAT
rhythm.
START
Specifies how rhythm playback starts.
STOP Specifies how rhythm playback stops.
Specifies whether a count-in is heard for
REC COUNT
recording.
Specifies whether a count-in is heard for
PLAY COUNT
playback.
Specifies whether the rhythm plays with
FILL
a fill-in or without a fill-in.
Specify individually whether each drum
PART1–4
sound of the selected drum kit is heard.
TONE LOW
Adjusts the tonal character of the rhythm
sound.
TONE HIGH