Backing-Up Or Recovering Data - Boss RC-500 Owner's Manual

Backing-Up or Recovering Data

1. Press the [MENU] button.
The SETUP screen appears.
SETUP
J
GENERAL
2. Turn the [MEMORY/VALUE] knob to select
"STORAGE," and press the [MEMORY/VALUE]
knob.
STORAGE
J
OFF
3. Turn the [MEMORY/VALUE] knob to set
"PREPARING...".
4. Use a USB cable to connect the RC-500's USB
port to your computer's USB port.
When a connection with the computer is established,
the message "CONNECTING... " appears.
* USB connection is not possible if the unit is not
stopped, or if there is a phrase that has not been
saved.
5. Open the BOSS RC-500 drive.
Windows
Within My Computer (or Computer), open "BOSS
RC-500" (or Removable Disk).
Mac OS
On the desktop, open the "BOSS RC-500" icon.
Connecting a Computer via USB
6. Back-up or recover the data.
Backup
Copy the entire "ROLAND" folder from the BOSS
RC-500 drive to your computer.
Recover
* When you execute this operation, the memory
currently saved in the RC-500 disappears. Back up in
advance.
In the BOSS RC-500 drive, delete the "ROLAND"
folder, and then copy the backed-up "ROLAND"
folder from the computer into the BOSS RC-500
drive.
NOTE
Do not delete the folders in the BOSS RC-500 drive
other than when executing the recovery operation.
7. Eject the USB drive.
Windows
In the lower right of your screen, click the [
0 [
] icon, and then click "Eject BOSS RC-500."
Mac OS
Drag the "BOSS RC-500" icon to the trash ("Eject" icon).
] icon
19