Upper Transport Area Jam; Transport Module Jams - Xerox DocuColor 7000AP Quick Start Manual

Upper Transport Area jam

Transport Module jams

3a
7c
7b
Do c u Co lo r 70 0 0A P /8 0 00 A P Q u i c k Star t G u i de
Jams occur in this area only when the Second
Feeder Module containing Trays 3 and 4 is
connected.
Pull out the Transport Area drawer above
1.
Tray 1.
Lift up the handle.
2.
3. Remove all jammed paper.
4. Return the drawer to its original position.
5. Follow the instructions on the UI to clear other
areas or to resume your print job.
Open the areas in the Transport Module indicated
on the UI. Carefully remove all jammed paper.
1. Open the Transport Module door.
Grasp the green handles 3a, squeeze and
2.
move it to the right.
3. Carefully remove all jammed paper.
4. Reposition handles 3a.
Lift up green handles 3b.
5.
Carefully remove all jammed paper and
6.
return handles 3b to the original position.
Follow the UI messages and, if required, lift
7.
3b
handles 7a and remove all jammed paper.
Return handles 7a to the original position.
Squeeze handles 7b and lower to the right.
8.
Remove all jammed paper. Return handles
7b to the original position.
Squeeze handles 7c and lower to the left.
9.
Remove all jammed paper. Return handles 7c
to the original position.
7a
Close the Transport Module door.
10.
Follow the instructions on the UI to restart
11.
your print job.
Exercises
11