Selecting Features; Obtaining A Sample Set - Xerox DocuColor 2045 Operator's Manual

E
N H A N C E D H I G H C A P A C I T Y S T A CK E R

Selecting Features

8
If sending a job through the network, refer to the documentation that came with
your color server for information on how to select stacker options on the print
driver screens.
Use the following instructions when using the digital press scanner to make
prints.

Obtaining a Sample Set

Occasionally you may want to check the image quality during a long run of a print
job. To accomplish this, the EHCS provides you with the Sample Set feature.
KEY POINT:
A digital press fault may occur if you request a sample set in the
following situations:
• Requesting a sample set before the first sheet of a set reaches the Stack
Tray
• The output destination is other than the Stack Tray of the EHCS from which
the request was programmed.
1
From the Basic Screen, select the More... button, located on the Copy Output
column.
E H C S
F O R D O C U C O L O R
Figure 4. Basic Features Screen
2 0 60 /2 0 45 O M
P E R A T O R A N U A L