Unloading The Stacker Tray - Xerox DocuColor 2045 Operator's Manual

Unloading the Stacker Tray

E HC S
F O R D O C U C O L O R
Use the following procedure to unload the Stacker Tray when it is full, or you
want to retrieve a job that has been completed.
1
Press the Unload button on the Stacker Control Panel. The Wait light blinks until
the Stacker Tray has reached the down position.
2
Open the front door when the Unload Light illuminates.
3
Position the securing bar on top of the stacked paper.
4
Pull the Stacker Cart straight out.
5
Remove the securing bar.
6
Remove the paper from the Stacker Tray.
7
Push the empty Stacker Cart straight into the EHCS.
8
Position the securing bar on the fixed area inside the EHCS.
NOTE:
The front door will not close if the securing bar is not properly attached
to the stacker frame.
9
Close the EHCS front door.
10
Follow the instructions displayed on the digital press Touch Screen to resume
printing.
2 06 0/ 2 04 5 O
P E R A T O R
E
N H A N C E D H I G H C A P A C I T Y S T A CK E R
M
A N U A L
7