Ip Address; Wan Device Settings; Dial-In; Dial-Out - INSYS MoRoS Quick Installation Manual

D

IP Address

12. Select menu Basic Settings – IP address (LAN)
13. Enter a static local IP address or enable DHCP client
14. Adjust address range for DHCP server to the local IP address (DHCP server and client
cannot be active simultanously!)
15. Adjust IP settings on PC side according to these settings (s. item B)
E

WAN Device Settings

▪ for operation outside western Europe: select country code
Modem:
▪ for operation with PABXs: disable "Wait for Dialtone"
▪ enter own MSN number (* for all numbers)
ISDN:
▪ enter and confirm PIN
GSM/GPRS:
▪ activate daily logging out and in
F

Dial-In

16. Enable Dial-In if MoRoS is allowed to accept incoming calls
17. Define user names and passwords (for the authentication when dialling-in)
G Dial-Out
18. Enable Dial-Out if MoRoS is allowed to establish a connection to a modem or to an
Internet Service Provider
19. Target A and Target B are called alternatingly; the last successful target is preferred.
Modem-, ISDN or GSM/CSD connections: enter telephone number and PPP user
name and password
GPRS: enter telephone number *99***1# and PPP user name and password, as well
as Access Point Name of the GPRS provider (e.g. internet.t-mobile.de)
© INSYS MICROELECTRONICS GmbH
Phone: +49 (0) 941 / 56 00 61
E-Mail: insys@insys-tec.de
Internet: www.insys-tec.de
Quick Installation Guide
INSYS MoRoS Modem / ISDN / GPRS
Page 2 / 2
Status 08/2007
Subject to technical changes; errors excepted