Saluki SFS-7000 Series User Manual page 10

 Operation of the fusion splicer
Turn the splicer off immediately and unplug the adapter from the power input port in
case the following conditions are seen:
 Fluid or unknown matters enter the splicer;
 The splicer suffers from severe shock and vibration.
No user serviceable parts inside. So do not dismantle it as any unqualified repair
may cause permanent destroy of the splicer and even personal injury.
During ARC discharge of the electrodes, voltage between the two electrode bars
reaches as high as thousands volt. Do not touch the electrodes to avoid damage to
the splicer and personal injury.
IV