Xerox 8825/8830 Operator's Manual page 7

SAFETY NOTES (continued)
Slots and openings in the cabinet and in the back and bottom of the
printer are provided for ventilation. To ensure reliable operation of
the printer and to protect it from overheating, never position the
printer so that these openings are near a radiator or heat register.
The printer should not be placed in a built-in installation unless
adequate ventilation is provided.
Never push objects of any kind into the slots of the printer in order
to avoid touching dangerous voltage points or short out parts that
could result in a risk of fire or electric shock.
Never spill liquid of any kind on the printer.
Never remove any covers or guards that require a tool for removal.
There are no operator serviceable areas within these covers.
Never attempt any maintenance function that is not specified in this
operator manual.
Never defeat the interlock switches. Your printer is designed to
prevent operator access to unsafe areas. The covers, the guards,
and the interlock switches are provided to ensure that the system
will not operate when the covers are open.
Unplug the printer from the wall outlet and refer all servicing to
qualified service personnel under the following conditions:
When the power cord is damaged or frayed.
If liquid has been spilled into the printer.
If the printer has been exposed to rain or water.
If the printer is producing unusual noises or odors.
If the printer or the cabinet has been damaged.
If you need additional safety information concerning the Printer or
supplied materials, you may call the following toll-free number:
1-800-828-6571.
XES Synergix 8825/8830 Printer Operator Manual
(continued)
3