Advertisement
5
Install the Bottom Shelf
Install the Bottom Shelf (D) onto the Vertical Dividers (E) with eight Hex Screws (G) using the
Hex Tool.
6
Slide the Outer Back Panels into Place
Slide the remaining Back Panels (F) into the grooves on the Top Panel (B) and Bottom Shelf (D)
as shown, until fully seated into the groove on the inside of the Vertical Dividers (E).
Tip: If the Back Panels (G) do not slide in easily, wiggle the panels while pushing into place.
7
Install the Right Side Panel
Install the Right Side Panel (A2) onto the Top Panel (B), Middle Shelves (C) and
Bottom Shelf (D) with ten Hex Screws (G) using the Hex Tool.
8
Install the Left Side Panel
Install the Left Side Panel (A1) onto the Top Panel (B), Middle Shelves (C) and
Bottom Shelf (D) with ten Hex Screws (G) using the Hex Tool.
Two Adults Recommended:
Carefully rotate the unit upright.
See Next Page
Advertisement
