Advertisement
1
Pre-Install the Hanger Hooks (optional)
Install two Hanger Hooks (J) to each Side Panel (A) by threading the Hanger Hook Posts and
Screws (I1/I2) together from both sides of the divider.
Install four Hanger Hooks (J) to each Vertical Divider (E) by threading the Hanger Hook
Posts and Screws (I1/I2) together from both sides of the divider.
2
Install the Shelves to the Dividers
Align the slit on Vertical Dividers (E) with the slits on Middle Shelves (C) as shown, and
slide together until seated.
3
Install the Top Panel
Place two Cam Locks (H2) into the recessed holes on each Grooved Divider (E), with the arrow
facing the closest edge.
Install eight Cam Posts (H1) into the threaded plastic inserts on the underside of Top Panel (B) with
a Phillips screwdriver. Reminder: Do not overtighten, as the plastic threads can be stripped.
Insert the Top Panel (B) Cam Posts into the holes on the top edge of the Vertical Dividers (E).
Turn the Cam Locks clockwise with a Phillips screwdriver to lock the Vertical Dividers (E) onto the
posts.
4
Slide the Center Back Panels into Place
Slide three Back Panels (F) into the grooves on the Vertical Dividers (E) as shown,
until fully seated into the groove on the underside of the Top Panel (B).
Tip: If the Back Panels (F) do not slide in easily, wiggle the panels while pushing into
place.
See Next Page
Advertisement
