Sample Form Creation - Xerox 4450 Forms Creation Manual

C.

Sample form creation

This appendix reviews the commands discussed earlier in this
guide, and illustrates a sample form along with the entire Forms
Source Library (FSL) that created it.
Practice entering the Forms Description Language (FDL)
commands that instruct the LPS to produce a sample form
accurately. Refer to the command definitions discussed earlier in
this guide as needed. Enter the commands as shown in the
sample FSL to produce the form.
You must be familiar with the LPS Editor utility or the editor at
your host.
The sample form that you create is shown in figure C-1, in
reduced size; your form will be actual size.
Figure C-1. Earnings register
XEROX 4050/4090/4450/4650 LPS FORMS CREATION GUIDE C-1