Form/Resolution - Xerox 4450 Forms Creation Manual

FORMS DESCRIPTION LANGUAGE

FORM/RESOLUTION

Parameter options
Parameter options
2-4
Defines the name and resolution of the form.
Naming the form
Defines the name of the form. Once the form is compiled and
stored on the system disk, this is the name used by the LPS
software to reference the form.
Syntax FORM name;
name
Default None. A form name is mandatory.
Example FORM BLUBOX;
Considerations The FORM command must be the first command in the form
definition and must be completely contained in the first record
of the form definition.
Reserved words (such as FORM, GRID, FONT, TEXT, BOX, LOGO,
and so on) cannot be used for the name. However, reserved
words can be modified and used (for example, FORM1, FORM2,
and so on).
Specifying resolution
The RESOLUTION parameter is an optional part of the FORM
command that allows you to specify whether the form is created
at 300 or 600 spots per inch (spi).
Syntax FORM name RESOLUTION IS value SPI;
name
value
Default None.
Example FORM BLUBOX RESOLUTION IS 300 SPI;
A one- to six-character identifier that references the form.
A one- to six-character identifier that references the form.
Specifies whether the form is created at 300 or 600 spi.
XEROX 4050/4090/4450/4650 LPS FORMS CREATION GUIDE