Xerox 4450 Forms Creation Manual page 68

FDL COMMAND SYNTAX SUMMARY
Command
BOX
COMMENT
END
FONT
FORM/
RESOLUTION
GRAPHIC
GRID
LANDSCAPE/
PORTRAIT
LINE
LOGO
PAPER
SECTION
TEXT AT
TEXT IN BOX
Compiling commands syntax
FDL filename NOPRINT TRAY DEBUG XPAN NOSOURCE PROOF SIMPLEX RES=value
A-2
Table A-2.
Syntax
AT y unit x unit DRAW n BOXES IN unit p unit WIDE BY q
unit HIGH USING type thickness SHADING density AND
REPEAT direction AT c
a
COMMENT text;
END;
FONTS id;
FORM name;
FORM name RESOLUTION IS value SPI;
GRAPHIC name AT vpos unit hpos unit SCALE IS n/d;
GRID UNIT IS format id ORIGIN y unit x unit;
orientation PAGE SIZE IS n WIDE BY m HIGH;
AT c unit DRAW n direction LINES IN unit FROM c
o
TO c unit USING type thickness AND REPEAT repeat
e
direction AT c unit ... EVERY c
a
LOGO id AT y unit x unit;
PAPER SIZE IS value;
BEGIN SECTION id;
or
DO SECTION id AT y unit x unit;
or
END SECTION id;
direction TEXT SPACED d units PER LINE ALIGNED alignment
USING FONT n AT y unit x unit 'text' 'text' ...;
direction TEXT SPACED d units PER LINE ALIGNED alignment
USING FONT n IN position BOX y unit x unit 'text' 'text' ...
IN NEXT direction BOX 'text' 'text' ...;
Reference Refer to the "Forms Description Language" chapter for a detailed
explanation of each command syntax.
To invoke the forms compiler, enter the following command at
the LPS keyboard. The entire command must fit on one line.
To print a stored form, enter the following:
SAMPLE filename.FRM
Reference Refer to the "Compiling and printing forms" chapter for more
information on compiling commands.
FDL command syntax
unit c unit ... EVERY c unit;
a i
unit;
i
XEROX 4050/4090/4450/4650 LPS FORMS CREATION GUIDE
unit
s