Advertisement
3A-22 FRONT SUSPENSION
TORQUE SPECIFICATIONS (Cont'd)
APPLICATION
FT . LBS .
Ball Joint Stud Nut - Lower*
40 -60
Ball Joint Stud Nut - Upper *
100 - 125
NOTE: All stud tapers on all ball joints must be kept sufficiently free of lubricant
to prevent excessive pull in mating tapered holes.
*NOTE: After reaching minimum torque required, nut must always be tightened
to inset cotter pin. Never back nut off.
SPECIAL TOOLS
J-2619-01
Slide Hammer
J-8433-1
Puller Bar
J-9745
Front Hub Bearing Installer
J-21474-3-4-5
Control Arm Bushing Remover and
Installer
J-22214-4-6
Front Hub Bearing Screw and Adapter
J-26559
Front Wheel Bearing Puller Ring
J-22269
Brake Caliper Collapser
J-22517-02
Torsion Bar Unloader
J-24319-01
Ball Joint, Pitman Arm and Idler Arm Puller
J-24717
Front Hub Puller
J-26485
Knuckle Seal Installer
J-22585-01
Front Hub Retainer Bolt Wrench
J-5504-01
Wheel Stud Remover
Advertisement
