Felton AXISS AXBMBA Installation Manual

INSTALLATION GUIDE - AUSTRALIA
AXISS BASIN MIXER BLACK AXBMBA
SYSTEM REQUIREMENTS
To ensure the optimum performance and customer satisfaction please adhere to the following:
• Flush out all pipe work prior to installation.
• Maximum hot water temperature is 60˚C. If the water temperature exceeds 60˚C an approved tempering valve must
be fitted.
• Installation should comply with relevant local authority requirements.
• In accordance with good plumbing practice, filters should be fitted to supply lines to eliminate damage to the
ceramic cartridge from suspended solids.
• AS/NZS 3500.1 states that pressures above 500kPa can cause damage from water hammer, reduce the life of
appliances, taps & fittings, cause excessive noise in the system and recommend that a pressure limiting valve (PLV)
be fitted.
MAXIMUM STATIC PRESSURE
Maximum static pressure 1500kPa. If water
pressure exceeds or is likely to exceed
1500kPa, an approved pressure limiting
valve must be fitted.
Failure to comply with the above will void warranties
WHAT IS IN THE PACK
1 x basin mixer
2 x supply hoses
1 x basin fixing kit
1 x hex socket spanner
MINIMUM STATIC PRESSURE
Mains Pressure
1 x red key for aerator
1 x basin flange
1 x basin flange o-ring
HOT COLD
150kPa 150kPa