Advertisement
INSTALLATION GUIDE - AUSTRALIA
REFLEX SINK MIXER RSMCA
SYSTEM REQUIREMENTS
To ensure the optimum performance and customer satisfaction please adhere to the following:
• Flush out all pipe work prior to installation.
• Maximum hot water temperature is 60˚C. If the water temperature exceeds 60˚C an approved tempering valve must
be fitted.
• Installation should comply with relevant local authority requirements.
• In accordance with good plumbing practice, filters should be fitted to supply lines to eliminate damage to the
ceramic cartridge from suspended solids.
• AS/NZS 3500.1 states that pressures above 500kPa can cause damage from water hammer, reduce the life of
appliances, taps & fittings, cause excessive noise in the system and recommend that a pressure limiting valve (PLV)
be fitted.
MAXIMUM STATIC PRESSURE
Maximum static pressure 1500kPa. If water
pressure exceeds or is likely to exceed
1500kPa, an approved pressure limiting
valve must be fitted.
Failure to comply with the above will void warranties
WHAT IS IN THE PACK
1 x basin mixer
2 x supply hoses
MINIMUM STATIC PRESSURE
Mains Pressure
1 x basin fixing kit
1 x benchtop o-ring
HOT
COLD
150kPa
150kPa
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Felton REFLEX SINK MIXER RSMCA
Summary of Contents for Felton REFLEX SINK MIXER RSMCA
- Page 1 INSTALLATION GUIDE - AUSTRALIA REFLEX SINK MIXER RSMCA SYSTEM REQUIREMENTS To ensure the optimum performance and customer satisfaction please adhere to the following: • Flush out all pipe work prior to installation. • Maximum hot water temperature is 60˚C. If the water temperature exceeds 60˚C an approved tempering valve must be fitted.
- Page 2 Warranty, Maintenance and Care YOUR COPY TO KEEP Felton Australia Pty Limited guarantees these mixers to be free from defects in materials and workmanship for a period of fifteen (15) years from the date of purchase. Fair wear and tear is expressly excluded. This warranty is e ective for fifteen (15) years from the date of purchase and covers the supply of replacement parts only and 2 years of plumber’s labour from the date of purchase relating solely to repairing or replacing the mixer, provided the product is installed by a...
Need help?
Do you have a question about the REFLEX SINK MIXER RSMCA and is the answer not in the manual?
Questions and answers