Optimum Product Performance - Xerox 100 User Manual

®
Xerox Nuvera 100/120/144 EA Digital Production System - Customer Expectations Document
System Product Specifications Overview

Optimum Product Performance

Print Volume Range
The Xerox Nuvera
Print Volume (AMPV) as below.
System
®
Xerox Nuvera 100/120/144
EA Digital Production System
Maximum Duty Cycle: Up to 3.7 million prints per month with the Xerox Nuvera
Production System.
Duty Cycle is defined as:
The maximum recommended monthly copy / print volume support under standard vendor supplied
service (3 x 7 shift coverage). This defines the upper end of expected customer volume band for the
device.
The Maximum AMPV / Duty Cycle cited above assume a print environment with dedicated skilled
operators and production grade finishing alternatives, such as the Basic Finishing Module. Actual
customer experience may vary in conjunction with the duty cycles of the selected third party or mid-
production finishing alternatives available.
Products configured with Xerox mid-Production Finishing alternatives such as the Multifunction Finisher
are expected to be used in environments with a Maximum AMPV of up to 500K per month.
The Customer should consider higher volume machines or multiple machines if average monthly
volume approaches Duty Cycle on a constant basis.
Prints between service calls on a digital Xerox Nuvera
for volume, applications, and throughput material. Specific customer requirements for Image Quality
may further impact the number of service calls. Xerox Nuvera
performance output and minimize service calls.
®
100/120/144 EA Digital Production System is designed for an Average Monthly
AMPV
100K – 1.5M (100/120 EA DPS)
150 K – 2.0M 144 EA DPS)
®
DPS are dependent on customer requirements
®
trained operators can optimize
- 12 -
Conditions
8.5 in. x 11 in./A4
®
144 EA Digital