Transmission Cables - Mitsubishi Electric PWFY-P100VM-E-BU Data Book

(4) Transmission cable specifications

(4)-1 Transmission cables

PWFY-P100VM-E-BU
Transmission cables
Shielding wire (2-core)
Type of cable
CVVS, CPEVS or MVVS
Cable diameter More than 1.25 mm
Remarks
PWFY-EP100VM-E1/E2-AU
Transmission cables
Shielding wire (2-core)
Type of cable
CVVS, CPEVS or MVVS
Cable diameter More than 1.25 mm
Remarks
*1 Connected with simple remote controller. CVVS, MVVS: PVC insulated PVC jacketed shielded control cable
(5) Connecting electrical connections
Verify that the model name on the operating instructions on the cover of the control box is the same as the model name
on the nameplate.
Step 1
Remove the screws holding the terminal box cover in place.
[Fig. V.1.(5).1]
•PWFY unit
(A)
Note:
Ensure that the wiring is not pinched when fitting the terminal box cover. Pinching the wiring may cut it.
Caution:
Install wiring so that it is not tight and under tension. Wiring under tension may break, or overheat and burn.
MA Remote controller cables
Sheathed 2-core cable (shielded)
CVVS
2
2
0.3 ~ 1.25 mm (0.75 ~ 1.25 mm
-
Max.length: 200 m
MA Remote controller cables
Sheathed 2-core cable
CVV (unshielded)
2
2
0.3 ~ 1.25 mm
-
Max.length: 200 m
CVV, MVV : PVC insulated PVC sheathed control cable
CPEVS : PE insulated PVC jacketed shielded communication cable
(C)
(B)
External input
Sheathed multi-core cable (shielded)
CVVS or MVVS
2
)*1 0.3 ~ 0.5 mm
Max.length: 100 m
External input
Sheathed multi-core cable
CVV or MVV (unshielded)
2
(0.75 ~ 1.25 mm )*1 0.3 ~ 0.5 mm
Max.length: 100 m
•Solenoid valve kit
(A)
(A) Screws
(B) Front panel
(C) Control box
- 60 -
External output
Sheathed multi-core cable (unshielded)
CVV or MVV
2
0.3 ~ 1.25 mm
Rated voltage: L1-N: 220 ~ 240 V
Rated load: 0.6 A
External output
Sheathed multi-core cable (unshielded)
CVV or MVV
2
0.3 ~ 1.25 mm
Rated voltage: L1-N: 220 ~ 240 V
Rated load: 0.6 A
(C)
(A)
(A)
(B)
2
2