Table of Contents
Advertisement
Power-off Sequence
Press the power supply circuit breaker to the OFF position (side 0 pressed down)
to power down the tape unit.
Note: Pressing the LOGIC OFF button causes the tape unit to enter a
standby power condition. Although the unit is not operational when the
LOGIC OFF button is pressed, the ac line voltage is still present in the unit.
Tape Loading
Operation
CAUTION
Exercise care when handling magnetic tape and the reel on which it is
mounted.
Th load tape, follow these steps.
1.
Make sure the tape unit is powered on and the LOGIC ON indicator is lit.
2. Unlock the hub latch by pressing the hub release button (Figure 3-2) on the
face of the supply reel hub.
Figure
3-2.
Rear Flange, Hub Latch, and Hub Release Button
3-2
BD52-00
c
C)
Advertisement
Table of Contents
