Table of Contents
Advertisement
Printer control panel
Messages
Please wait
Ready to copy/print
Copy/print
Warm-up
Manual mode
Close covers
Call for service
Turn printer off, then on
Replace toner bottle
Replace black toner
cartridge
Replace red toner
cartridge
Add media
30
Messages
On condition
The machine condition before the ready to copy/print is
displayed.
When machine operation has stopped due to a problem.
When the machine is in the ready condition.
When the machine is running copies.
During the machine warm-up cycle.
When the machine starts copying from the manual feed tray.
Indicates one of the printer doors is open.
When the machine detects an unrecoverable error that cannot be
recovered by a power-on reset.
When the machine detects on unrecoverable error.
When the machine detects the toner bottle is filled up to its maximum
capacity. To replace the toner bottle call for service.
When the machine detects the black toner cartridge is out of toner.
When the machine detects the red toner cartridge is out of toner.
Indicates the machine has run out of media. Check the appropriate
drawer or tray.
Getting to know the MAX 200
Advertisement
Table of Contents
