Setting Up The Docucolor 2006 In The Chooser - Xerox Copier Getting Started

Xerox copier user manual
Table of Contents

Advertisement

3. Network Setup

Setting up the DocuColor 2006 in the Chooser

1.
Select Chooser from the Apple menu.
2.
Ensure that AppleTalk is set to Active.
3.
If necessary, select the AppleTalk Zone that contains your printer.
4.
Select the AdobePS icon.
The printer is displayed in the Select a PostScript Printer list in the form
of <server name>_<device name>_<print connection>. The device
name is the internal name of your printer.
5.
Perform one of the following steps:
6.
Perform one of the following steps:
7.
To configure the printer, double-click the printer from the PostScript
Printer list. Select the Configure button and select available options.
Select OK two times.
8.
Close the Chooser.
For detailed information about installing Fiery software and fonts; configuring
connections for ColorWise ProTools, Fiery Spooler or Fiery Link; or installing
fonts or additional software, refer to the
Macintosh OS environment
3-12
If Desktop printing is on, select a printer connection from the Select
a PostScript printer list and select Create. A printer icon is
created and displayed on the desktop.
If Desktop printing is not on, select the Setup button.
The Adobe PS printer driver automatically selects the correct PPD
file for your DocuColor 2006.
If Desktop printing is on, select the printer icon that is displayed on
the desktop or select the printer in the Chooser list. Select the
Setup button
If Desktop printing is not on, an icon is displayed next to the newly
installed printer in the Chooser list. Select the printer icon and
select the Setup button.
chapter on the user CD.
Macintosh OS print drivers
Installing user software in a
Xerox DocuColor 2006

Advertisement

Table of Contents
loading

This manual is also suitable for:

2006npc - docucolor color laser

Table of Contents