Xerox Copier Getting Started page 108

3. Network Setup
7. Perform one of the following:
•
• For PostScript printing: English\Prntdrvr\PS_drvr\Win_9x
• For PCL printing: English\Prntdrvr\PCL_drvr\Win_9x
•
• For PostScript printing: Prntdrvr\PS_drvr\Win_9x
• For PCL printing: Prntdrvr\PCL_drvr\Win_9x
Select OK and ensure that the oemsetup.inf or oemsetup option is
selected.
8. Verify the path is correct and select OK.
9. In the Printers box, select Xerox DocuColor 2006 and Next.
10. Select LPT1: ECP Printer Port and Next.
11. Using a maximum of 31 characters, enter a name for the printer or leave
the default name in the Printer name box.
12. If you want the DocuColor 2006 to be the default printer, select Yes; if
not, select No. Select Next.
13. Select No in the next dialog box to postpone printing a test page and
select Finish.
When the installation is complete, the necessary files are installed to your
hard disk. Configure the options on your printer and complete the appropriate
network connection.
For detailed information about setting up parallel port printing, IPX/SPX
printing, SMB printing or setting printer options and installing additional
software, refer to
environment.
3-6
If you are installing from the CD, browse to one of the following
folders:
If you are installing from files you downloaded using the Installer
WebTool, browse to one of the following folders
Installing the user software in a Windows 95/98
Windows 95/98 print drivers
Xerox DocuColor 2006