Xerox Copier Getting Started page 26

1. Setting up the DocuColor 2006
11. Close the Front Cover.
12. If you do not have a 2 Tray Module, go to the next procedure
Installation.
If you installed the Printer on the 2 Tray Module, perform the following
steps:
a.
b.
1-16
Remove the small cover from the rear of the Printer.
Connect the two small connectors from the 2 Tray Module into the
jacks in the Printer.
Unpacking the Printer
301077b
Printer
0 301029A-WOL
0 301030A-WOL
Xerox DocuColor 2006