Xerox Copier Getting Started page 112

3. Network Setup
8. Perform one of the following:
•
•
Select OK and ensure that oemsetup.inf or oemsetup is selected.
9. Verify the path is correct and select OK.
10. In the Printers box, select Xerox DocuColor 2006 and Next.
11. Using a maximum of 31 characters, enter a name for the printer or leave
the default name in the Printer Name box.
12. If you want the DocuColor 2006 to be the default printer, select Yes; if
not, select No. Select Next.
13. Indicate whether you want the printer installed as a shared printer. If you
select Shared, enter a Share Name for the printer (or leave the printer
default name) and make selections from the list of operating systems
used by client workstations. Select Next.
14. Select Yes in the next dialog box to postpone printing a test page and
select Finish.
When the installation is complete, the Printers window is displayed with
an icon for the newly installed printer. When you select Print, your files
are transmitted over the parallel port connection to the printer.
For detailed information about setting up parallel port printing, IPX,
TCP/IP, SMB printing or setting printer options and installing additional
software, refer to the
environment
3-10
If you are installing from the CD, browse to one of the following
folders:
• For PostScript printing: English\Prntdrvr\PS_drvr\Win_NT4.x
folder
• For PCL printing: English\Prntdrvr\PCL_drvr\Win_NT4.x
folder
If you are installing from files you downloaded using the Installer
WebTool, browse to the Prntdrvr folder.
Installing the user software in a Windows NT 4.0
chapter on the user CD.
Windows NT 4.0 print drivers
Xerox DocuColor 2006