TFA 35.1078.10.IT Instruction Manual page 32

5. Press the SET key again to confirm and to enter the date setting mode.
The date starts flashing.
6. Use the OUT/+ key to set the date.
Confirm all calendar settings with the SET key and enter the Temperature
7.
unit setting.
°C/°F TEMPERATURE SETTING:
The temperature display can be selected to show temperature data in °C or °F
(Default °C).
Use the OUT/+ key to toggle between "°C" or "°F".
1.
2. Confirm with the SET key and enter the Air pressure unit setting.
hPa / inHg PRESSURE UNIT SETTING:
The pressure display can be selected to show relative air pressure in hPa or inHg
(default is "hPa").
Flashing
Use the OUT/+ key to toggle between "hPa" or "inHg" unit
1.
2. Confirm with the SET key and enter the Relative air pressure value
setting.
Note: Units of weather icon sensitivity and air pressure history are not
affected. They are always expressed in hPa.
RELATIVE AIR PRESSURE VALUE SETTING
The default relative pressure value is 1013 hPa (29.92 inHg). This can be
manually set to another value within the range of 960 – 1040 hPa (28.35 –
30.72 inHg) for a better reference.
1. The current relative pressure value will start flashing
2. Use the OUT/+ key to increment and IN key to decrement the value. Keep
holding the key allows the value to advance faster.
3. Confirm with the SET key and enter the Weather forecast icon sensitivity
setting.
Flashing
31
Flashing