Lcd Contrast Setting; Time Zone Setting; Time Reception On/Off Setting - TFA 35.1078.10.IT Instruction Manual

LCD CONTRAST SETTING:

Last digit flashing
The LCD contrast can be set within 8 levels, from LCD 0 to LCD7 (Default setting
is LCD 4):
1. Press and hold the SET key until the digit starts flashing.
2. Use the OUT/+ key to view all levels of contrast.
3. Select the desired LCD contrast. Confirm with the SET key and enter in the

Time Zone setting.

TIME ZONE SETTING:
The time zone default of the Weather Station is "0". To set a different time zone:
1. The current time zone value starts flashing.
2. Use the OUT/+ key to set the time zone. The range runs from 0 to -12 and
then runs from +12 back to 0 in consecutive 1-hour intervals.
3. Confirm with the SET key and enter the Time reception ON/OFF setting.

TIME RECEPTION ON/OFF SETTING:

Flashing
In area where reception of the DCF time is not possible, the DCF time reception
function can be turn OFF. The clock will then work as a normal Quartz clock.
(Default setting is ON).
The digit "ON" will start flashing on the LCD.
1.
2. Use the OUT/+ key to turn OFF the time reception function.
3. Confirm with the SET key and enter the 12/24-hour format setting.
Note:
If the time reception function is turn OFF manually, the clock will not
attempt any reception of the DCF time as long as the Time Reception OFF
function is activated.
The time reception icon and the "DCF" icon will not be displayed on the
LCD.
12/24-HOUR FORMAT SETTING:
29
Flashing
Flashing