natus Otometrics Bio-logic AuDX PRO FLEX Quick Start Manual page 9

Quick Guide:
Bio-logic AuDX PRO FLEX
®
DPOAE threshold
Connect the red probe to the red
connector and select one of the
Presets for DPOAE Threshold. To
perform binaural testing, also
connect the blue probe to the
blue connector.
A calibration will be performed prior to measurement. A green light indicates successful calibration.
After successful ear probe calibration, the test will start automatically.
Probe fit override for patients with
PE tubes or middle ear perforations
9
Diagnostic OAE and audiometry
®
Stop test
Skip a frequency
Pause/resume test
Otometrics - Next generation Bio-logic products
Bio-logic
Select the appropriate ear tip size
and place it on the probe tip.
Insert the probe in the ear making
sure that the ear tip fits tightly into
the ear canal.
Select the test ear by pressing
either the Right or Left button,
or the Right + Left button for
binaural testing.
Cartoon mode will start the test
showing a cartoon instead of the
progress bar, this can be changed
during the test by tapping on the
plane icon at the bottom of the
device screen.
Progress for each
tested frequency
in each ear
Noise floor level
cartoon mode
for children
®