Disassembling Of The Various Components - Jura ENA Micro 9 One Touch Disassembling Manual

Elektroapparate AG
Language
EN
1

Disassembling of the various components:

Important:
When exchanging components, it is very important to put back the cable wiring the same way
as it was before !
 Remove water tank, grounds container, aroma preservation lid, powder funnel
1. Turn JURA emblem anticlockwise
(e.g. with a suction disc).
Rather pulling than pushing when removing.
3. Release snap-lock of fixation of the lateral part
Author: Patrik Studer
Date: Rev. A:
06.10.2011 11.11.2011
Disassembling manual
ENA Micro 9 One Touch
Checked:
Rev. B: Rev. C:
2. Unscrew the Oval screw
4. Unscrew 2x TORX 15
Approved: Docu.-name:
L:\Geräte\ENA\ENA_Micro\ENA_Micro_9\Schulungsunterlage
n\E\Demontage_ENA_Micro_EN.doc
Rev. D: Rev. E:
Technical Support
Demontage_ENA_Micro_EN.doc
Rev. F:
Page 2/15