Xerox DocuColor 5750 Getting Started page 58

46 Installing user software on a Windows computer
4. In the "Add LPR compatible printer" dialog box, enter the IP address of the DocuColor.
If your network uses Domain Name Services (DNS), enter the DNS name assigned to
the DocuColor instead of the IP address.
5. Press Tab and type the internal name of the DocuColor in lowercase letters.
The name must be print_5750.
Type this name exactly as shown; it is required for communication with the
N :
OTE
DocuColor.
6. Click OK.
The workstation checks the address or DNS name that you entered and notifies you if
it cannot resolve the address.
7. Close the Printer Ports dialog box.
The Ports property sheet shows the new port configuration.
8. Click OK to close the Ports property sheet.
The new port has been configured. You should now print a test page to verify the
connection.
9. Open the Printer Properties dialog box for the DocuColor. Click General and click Print
Test Page.
When you print, your files are transmitted over the LPR Port connection to the
DocuColor.
10. Click OK to exit the Printer Properties dialog box.