Setting Up Printing With Windows Nt 3.51 - Xerox DocuColor 5750 Getting Started

33 Installing Windows utilities

Setting up printing with Windows NT 3.51

To set up Windows NT printing, install the Windows NT PostScript printer driver
and configure printing for your network type. Note that printer files support the Intel
version of Windows NT.
If your administrator has set up the DocuColor on an NT server and shared it, you
may not have to enter all the information described in this section. Any windows that
are not necessary will not appear, and you can verify information that appears in other
windows instead of typing in new information. For information about setting up and
printing to the DocuColor with a Windows NT server, see the Administrator Guide.
If you have problems installing the DocuColor with Windows NT, try installing
N :
OTE
another PostScript printer (such as the Apple LaserWriter IIg), and then install the
DocuColor. Installing another printer insures that all files are properly installed and
available. For instructions, see your Windows NT documentation.
T
O INSTALL THE PRINTER FILE FOR A PARALLEL
W
CONNECTION FROM INDOWS
1. In the Windows NT Print Manager window, choose Create Printer from the Printer
menu.
2. In the Create Printer dialog box, scroll down the list of drivers and select Other.
The Install Driver dialog box is displayed, prompting you to insert the disk.
, TCP/IP,
NT W :
ORKSTATION
A T
OR PPLE ALK