To Delete a COD License
▼
Before deleting a license, the COD software determines whether sufficient licenses
are available from the pool of installed licenses plus headroom. If all licenses are in
use and no headroom is available, the operation will fail. You can force the operation
by using the -f option in
reservations that might be in effect.
1. Log in to the XSCF console with platadm privileges.
2. Verify that you have enough licenses or headroom to cover COD resources
currently in use.
Use the showcodlicense command, as described in
Status" on page
compensate, power off one or more domains or disconnect the appropriate
number of boards.
3. Type the deletecodlicense command:
XSCF> deletecodlicense license-signature
where license-signature is the complete COD license key assigned by the Sun License
Center.
4. Verify that the license key was removed from the license database by typing
the showcodlicense -r command.
The COD RTU license key that you deleted should not be listed in the
showcodlicense output. See
To Trade a COD License
▼
You must obtain replacement license(s) when you want to:
Replace a corrupted license
■
Trade licenses from one server to another
■
1. Obtain a replacement license by contacting the Sun License Center, as
described in
Have ready a paper copy or email message copy of your licenses and license keys
to be replaced.
2. Log in to the XSCF console with platadm privileges.
3. Delete the license(s) to be replaced, as described in
on page
8
Sun SPARC Enterprise Mx000 Servers Capacity on Demand (COD) User's Guide • September 2007
Step
3, but doing so will overcommit any license
13. If you do not have sufficient licenses or headroom to
"To Obtain a COD RTU License and License Key" on page
8.
"To Display COD License Status" on page
"To Display COD License
13.
6.
"To Delete a COD License"