Timers; Auto Clear - Xerox Document Centre 220 Setup Manual

To change the default display
for the Touch Screen:
À
Select the preferred default
screen
À
Touch Save to continue
The screen selected will be
displayed when the machine is
switched ON, when
programming or job time-out
occurs, or when AC is pressed.

Timers

Page 3-6
NOTE: The buttons available will depend on the machine
configuration.
À
Access Machine Setups as described on Page 3-1.
À
Touch the Timers button.
À
Touch any button to change the setting - a description of
each follows.
À
Make changes as required.
À
Touch Save to continue.

Auto Clear

With the Auto Clear feature enabled, the machine returns to
the default settings after the specified time.
Machine Setup