inventum BDA432 Instruction Manual page 41

CAUTION:
• Remove batteries if the device is not likely to be used for some time.
• The old batteries are harmful to the environment; do not dispose with other daily trash.
• Remove the old batteries from the device and follow your local recycling guidelines.
• Do not dispose of batteries in fire. Batteries may explode or leak.
• Do not use new and used batteries together.
• Do not use different types of batteries together.
Measurement principle
This product uses the Oscillometric Measuring method to detect blood pressure. Before every measurement, the unit establishes a "zero
pressure" equivalent to the air pressure. Then it starts inflating the arm cuff and, meanwhile, the unit detects pressure oscillations generated
by beat-to-beat pulsation, which is used to determine the systolic and diastolic pressure, and also the pulse rate.
Date, time and unit settings
It is important to set the clock before using your blood pressure monitor, so that a time stamp can be assigned to each record that is stored
in the memory. (year: 2014 —2054, time format: 24 H/12 H)
1. When the monitor is off, hold pressing "SET" button for about
3 seconds to enter the mode for setting the year. The blinking
numeral represents [YEAR].
41
English •