Advertisement
5. Secure the VHX system to the spacer with the provided six (6) 2" screws
(white arrows), and then to the bezel with the three (3) ½" pan head
screws (black arrows).
7. Re-install the cluster into the
vehicle using stock hardware and
refer to the main manual for wiring
instructions to complete the VHX
installation.
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
6. Connect the CAT5 cable to the system. As the
assembled cluster is installed into the dash, take
care when routing this cable to the control box
mounting location.
Manual # 650421B
Advertisement
