Lds Programming - HAKO Sweepmaster P 1200 RH Service Manual

Service Manual

6.7.2 LDS Programming

In order to invoke the programming level, press the left button "▲
Set battery type:
04
Hako GmbH
In the display, three digits for the discharge profile – charged value are flashing (set to
2.04 V/Z in the factory).
Press the right button "►" to increment the charged value by 0.01 V/Z or hold depressed for
continued incrementing.
After the 2.30 V/Z value has been attained, display re-starts automatically with 1.80 V/Z.
After the desired charged value of the profile has been attained, press the left button"▲
once.
Technical Service (KUD)
Confidential - For internal use only!
/•
" and hold depressed until display flashes. Then release button.
23843 Bad Oldesloe
/•
"
Edition: 05/2014