Table of Contents
Advertisement
Service Manual
Adjusting parallelism
• Loosen l-h half-bearing of torsion shaft
• Adjust parallelism with stop screw
3.2.2 Side broom
Provide for side brush inclination such that the contact surface covers about
Seen in direction of travel, the floor contact surface of the
Hako GmbH
r-h side brush should be
l-h side brush
Technical Service (KUD)
Confidential - For internal use only!
2
/
of the brush circumference.
3
between the 11 and 3 o'clock position.
between the 9 and 1 o'clock position
23843 Bad Oldesloe
Half-bearing
Torsion shaft
Stop screw
Edition: 05/2014
Hide quick links:
Advertisement
Table of Contents
