Identifying Logical and Physical Network Interface Names
Prepare the server storage drives. For more information, refer to the
Before You Begin
■
Installation
Perform the steps in
■
During the OS installation and configuration process, you might need to provide logical and
■
physical network names. For more information, see
Network Interface Names" on page
For local installation, have the installation media available to insert into the attached
■
physical CD/DVD-ROM drive when prompted.
For remote installation, insert the installation media into the Remote Console system's
■
CD/DVD-ROM drive. Make sure you have selected CD-ROM from the Remote Console
Device menu.
If you are using an ISO image, ensure that it is accessible from the Remote Console system.
■
Make sure you have selected CD-ROM Image from the Remote Console Device menu.
Ensure that the server is in standby power mode.
1
Boot the server and watch the video monitor or Remote Console screen for the prompt to press
2
the F9 key to enter Oracle System Assistant.
28
Sun Blade X4-2B Installation Guide for Linux Operating Systems • March 2014
Guide.
"Preparing to Install the OS" on page
15.
"Identifying Logical and Physical
23.
Sun Blade X4-2B